H10 Tool Steel Properties

H10 Tool Steel Properties

Produce Process: Hot Rolled /Forged
Type:Plate/Round Bar/Flat Bar
Αποστολή ερώτησής
Εισαγωγή προϊόντος
Products Description

H10 tool steel is one hot works tool steel in ASTM A681 standard, which is for alloy tool steel. The ASTM/AISI classifies chromium hot work tool steels as group H steels, ranging from H10, H11, H12 to H19. AISI H10 Tool Steel is one of chromium hot-work tool steel that exhibits excellent resistance to softening at elevated temperature.
H10 Tool Steel is capable of being heat treated to higher hardness than the tungsten hot work steels, and in addition offers greater toughness. H10 tool steel has good thermal fatigue characteristics, and unlike the tungsten hot work steels and H10 hot work tool steels may be safely water cooled in service.

 

product-500-500
H10 Steel Available Sizes:

Round Bar:

Hot Rolled: diameter 10-60mm,

Hot Forged :diameter60-550mm

Flat Bar:

Hot Rolled: 12-60X100-610mm,

Hot Forged : 30-350X200-810mm

product-936-887
H10 Steel Applications

1. Highly stressed hot work tools, mainly for the processing of heavy alloys, such as mandrels, dies and containers for metal tube and rod extrusion; hot extrusion tools;
2. Tools for the manufacture of hollows, screws, rivets, nuts and bolts.
3. Die casting tools, forming dies, die inserts, hot shear blades.

Products parameters

H10 Steel Equivalent Grades:

AISI / SAE
DIN / W.Nr JIS GB
H10 1.2365 SKD7

----

 

H10 Chemical Composition (%)

Steel Grade C Si Mn P S Cr Mo V
1.2365 0.28-0.35 0.10-0.40 0.15-0.45 ≤ 0.030 ≤ 0.030 2.70-3.20 2.50-3.00 0.40-0.70
H10 0.35-0.45 0.80-1.20 0.25-0.70 ≤ 0.030 ≤ 0.030 3.00-3.75 2.00-3.00 0.25-0.75

 

Heat Treatment
Annealing
750 to 800°C (1382 to 1472°F)
Slow controlled cooling in furnace at a rate of 10 to 20°C/hr (50 to 68°F/hr) down to approx. 600°C (1112°F), further cooling in air. Hardness after annealing: max. 235 HB.

Stress relieving
600 to 650°C (1112 to 1202°F)
Slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes. After through heating, hold in neutral atmosphere for 1 - 2 hours.

Hardening
1010 to 1050°C (1850 to 1922°F)
Oil, salt bath (500 - 550°C / 932-1022°F), air
Holding time after temperature equalization: 15 to 30 minutes.
Obtainable hardness: 52 - 56 HRC

 
Product Picture

Forged Tool Steel Bars

Our factory
product-600-600

Steel Making

product-600-600

Ingot Production

product-750-750

Forged Bars

product-600-600

Machinary

 

Heat Treatment of H10 / 1.2365 tool steel 

Tempering
Slow heating to tempering temperature immediately after hardening / time in furnace 1 hour for each 20 mm of work piece thickness, but at least 2 hours / cooling in air. It is recommended to temper at least twice. A third tempering cycle for the purpose of stress relieving may be advantageous.
1st tempering approx. 30°C (86°F) above maximum secondary hardness.
2nd tempering to desired working hardness. The tempering chart shows average tempered hardness values.
3rd for stress relieving at a temperature 30 - 50°C (86 to 122°F) be low highest tempering temperature.

The application case

 

product-844-201

Applications

● Die, such as: mold kernel, inserts, thimble, sleeve.

● Extrusion die, such as: mold, mold pad, bushing.

● Aluminum and copper hot pressing molding die.Plastic mold.

● Cold, trimming, hot shear, tightening ring and wear parts.

 

 

Our Service
Payment terms:
  • T/T 30% deposit and the 70% balance after finished production.

  • Delivery condition:

  • For abundant stock, 7-10 days.

  • For customized products, 30-40 days

 

product-950-408

Δημοφιλείς Ετικέτες: h10 tool steel properties, China h10 tool steel properties manufacturers, suppliers, factory

Αποστολή ερώτησής

whatsapp

Τηλέφωνο

Ηλεκτρονικό ταχυδρομείο

Εξεταστική